Wsm 05-E2B SERIES Spécifications télécharger pdf (Page 85)

S-32

03-E2B SERIES, WSM

DIESEL ENGINE

Rocker Arm and Push Rod

1. Remove the rocker arm bracket screws (D1403/D1503/D1703/

D1903/V2203-E2B) or nuts (V2203-T/F2803-E2B).

2. Detach the rocker arm assembly (1).

3. Remove the push rods (2).

(When reassembling)

• When putting the push rods (2) onto the tappets (3), check to see

if their ends are properly engaged with the grooves.

IMPORTANTQ

• After installing the rocker arm, be sure to adjust the valve

clearance.

W1021437

Tightening torque

Rocker arm bracket screw

23.5 to 27.5 N·m

2.4 to 2.8 kgf·m

17.4 to 20.3 ft-lbs

Rocker arm bracket nut

23.5 to 27.5 N·m

2.4 to 2.8 kgf·m

17.4 to 20.3 ft-lbs

(1) Rocker Arm Assembly

(2) Push Rod

(3) Tappet

KiSC issued 05, 2008 A

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 124 125

Pas de commentaire

Wsm 05-E2B SERIES Spécifications Page 85