Wsm 05-E2B SERIES Spécifications télécharger pdf (Page 98)

S-45

03-E2B SERIES, WSM

DIESEL ENGINE

Crankshaft

NOTEQ

• Before disassembling, check the side clearance of

crankshaft. Also check it during reassembling.

1. Remove the main bearing case screw 2 (1).

2. Pull out the crankshaft assembly, taking care not to damage the

crankshaft bearing 1 (3).

(When reassembling)

IMPORTANTQ

• Install the crankshaft sub assembly, aligning the screw hole

of main bearing case 2 (2) with the screw hole of cylinder

block.

• When tightening the main bearing case screw 2 (1), apply oil

to the screw and screw by hand before tightening the

specific torque.

If not smooth to screw by hand, align the screw holes

between the cylinder block and the main bearing case.

W1066311

Tightening torque Main bearing case screw 2

68.6 to 73.5 N·m

7.0 to 7.5 kgf·m

50.6 to 54.2 ft-lbs

(1) Main Bearing Case Screw 2

(2) Main Bearing Case 2

(3) Crankshaft Bearing 1

KiSC issued 05, 2008 A

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 124 125

Pas de commentaire

Wsm 05-E2B SERIES Spécifications Page 98